Step-by-Step Guide to Replacing the Water Pump in a Hino 338

Replacing the water pump in your Hino 338 may seem daunting, but with the right tools and guidance, it's a manageable task. The water pump plays a vital role in your vehicle's cooling system, ensuring that the engine runs at optimal temperatures. This guide will walk you through the process step by step, making it easier for you to maintain your truck's performance.

Tools and Materials Needed

Before you begin, it's essential to gather all necessary tools and materials:

• Socket set

• Wrench set

• Torque wrench

• New water pump

• Gasket or sealant

• Coolant

• Drain pan

• Safety goggles and gloves

Step-by-Step Replacement Procedure

Follow these steps to replace the water pump in your Hino

1. Remove coolant

2. Remove radiator or only loose its mount bolts make some space

3. Remove fan, pully and fan belt

4. Remove benzo bolt and water pipe

5. Remove 8 bolts from its front side

6. And then remove 3 bolts from upper side

7. remove water pump

8. clean all gasket area

9. Put new gasket or silicon

10. Put new water pump

11. Now tight all the nuts and bolts

    IN THE END START ENGINE AND CHECK IF THERE ARE ANY LEAKINGS OR NOT.